P0207

Cylinder 7 Injector A Circuit

Q: Is it safe to drive with P0207?

Only briefly. Cylinder 7 misfiring makes the engine run rough and can overheat and damage the catalytic converter. Repair it soon.

Q: Can I just clear P0207?

It returns while the injector or its circuit is faulty. Because a raw misfire can harm the converter, fix the cause rather than clearing it.

Fuel injector circuit Generic OBD-II High

What it means

P0207 means the ECM has detected an electrical fault — usually an open or short — in the fuel-injector control circuit for cylinder 7. With that injector not firing properly, cylinder 7 misfires, so the engine runs rough, loses power, and may be hard to start. A persistent misfire can overheat and damage the catalytic converter, so address it soon.

High

Can I keep driving? Drivable but rough — a dead injector means cylinder 7 misfires and the engine loses power; running it long risks catalytic-converter damage, so repair soon.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on (may flash during an active misfire)
Rough idle and misfire
Reduced power and hesitation
Increased fuel consumption
Possible hard starting

Common causes

Most likely first

Faulty cylinder 7 fuel injectorLikely
Open or short in the injector wiringCommon
Corroded or loose injector connectorCommon
Injector driver fault inside the ECM/PCMLess often

How to diagnose & fix

Work through it in order

Scan and read freeze-frame data to confirm the cylinder 7 injector circuit fault.
Inspect the injector connector and wiring for damage, corrosion, or an open circuit.
Measure the injector's resistance against specification.
Verify injector operation (swap-test with another cylinder if practical).
Replace the injector if faulty, then clear and retest.

FAQ

Quick answers

Is it safe to drive with P0207?+

Only briefly. Cylinder 7 misfiring makes the engine run rough and can overheat and damage the catalytic converter. Repair it soon.

Can I just clear P0207?+

It returns while the injector or its circuit is faulty. Because a raw misfire can harm the converter, fix the cause rather than clearing it.

Read & clear P0207 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX