DOBD DashX Browse all codes Blog
P0369

Camshaft Position Sensor B Circuit Intermittent Bank 1

Camshaft position Generic OBD-II High

What it means

P0369 means the camshaft position sensor "B" signal on bank 1 is intermittent. The ECM relies on cam position to sequence fuel and spark, so a dropping signal can cause stalling, hard starting, or an occasional no-start, along with rough running. The fault comes and goes, but it should be treated as a genuine starting and driveability risk.

High

Can I keep driving? Risky — an intermittent cam signal can cause stalling, hard starting, or an occasional no-start, so treat it as unreliable and repair it before relying on the car.

Real-world scan data

Seen in
203
scans in the past year
Found in
<0.1%
of scans
0.1%
of scans that found faults

Appears alongside · share of P0369 scans

P0365in 59.6% of scans
P0344in 29.1% of scans

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Intermittent open in the cam-sensor B wiring or connector
  2. Faulty camshaft position sensor B
  3. Corroded or loose connector
  4. Timing chain/belt or reluctor-ring alignment issue
  5. Faulty ECM (rare)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and note when the signal drops.
  2. Wiggle-test the sensor B connector and harness.
  3. Inspect the sensor, its air gap, and the reluctor ring.
  4. Replace cam sensor B if the signal is erratic.
  5. Verify timing components if the signal correlates poorly with the crank. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0369?+
Not reliably — it can stall or fail to start unexpectedly. Fix it before depending on the vehicle.
Can I just clear P0369?+
It returns when the intermittent fault recurs; the wiring or sensor must be repaired.

Related codes

Read & clear P0369 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX