P060C

Internal Control Module Main Processor Performance

Q: Is it safe to drive with P060C?

Not recommended. An internal processor fault can cause sudden stalling or a no-start, so get it diagnosed before relying on the vehicle.

Q: Can I just clear P060C?

Clearing may temporarily reset it, but if the ECM has a real power, ground, or internal fault it will return. Fix the cause first.

Control module (ECM/PCM) Generic OBD-II High

What it means

P060C means the ECM's internal self-checks found that its main processor isn't performing correctly. Because this processor runs the engine, the fault can cause stalling, limp mode, or a no-start. It's often triggered by poor power or ground to the module (a weak battery or corroded terminals) but can also mean the ECM itself is failing.

High

Can I keep driving? Risky — the processor running the engine is reporting a fault; the car may stall, enter limp mode, or fail to start. Have it diagnosed before driving far.

Real-world scan data

Seen in

238

scans in the past year

Found in

<0.1%

of scans

0.1%

of scans that found faults

Appears alongside · share of P060C scans

U1002in 23.9% of scans

P0606in 21.4% of scans

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Engine may stall or fail to start
Reduced power or limp mode
Erratic or intermittent engine behavior

Common causes

Most likely first

Poor ECM power or ground (weak battery, corroded terminals, bad grounds)Likely
Low or unstable battery voltageCommon
Corrupted or outdated ECM softwareCommon
Internal ECM processor failureLess often

How to diagnose & fix

Work through it in order

Test and charge the battery; clean and tighten the battery and ground terminals.
Inspect the ECM power and ground circuits for corrosion or high resistance.
Check for a manufacturer reflash or software update for the ECM.
Reprogram the ECM; replace it only if an internal fault is confirmed.
Clear the code and re-test to confirm the repair.

FAQ

Quick answers

Is it safe to drive with P060C?+

Not recommended. An internal processor fault can cause sudden stalling or a no-start, so get it diagnosed before relying on the vehicle.

Can I just clear P060C?+

Clearing may temporarily reset it, but if the ECM has a real power, ground, or internal fault it will return. Fix the cause first.

Read & clear P060C yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX