DOBD DashX Browse all codes Blog
P0793

Intermediate Shaft Speed Sensor A Circuit No Signal

Transmission Generic OBD-II Medium

What it means

P0793 means the transmission control module is receiving no signal from intermediate shaft speed sensor A. Without that speed input the module can't correctly calculate gear ratios and shift timing, so shifts become harsh or erratic and the transmission may enter limp mode. It's usually a failed sensor, wiring fault, or damaged reluctor ring.

Medium

Can I keep driving? Often drivable but shifting can be harsh or erratic; get it diagnosed soon.

Real-world scan data

Seen in
64
scans in the past year
Found in
<0.1%
of scans
<0.1%
of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty intermediate shaft speed sensor
  2. Open or short in the sensor wiring or connector
  3. Corroded connector
  4. Damaged sensor reluctor ring
  5. Transmission control module fault (less common)

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and note any companion speed-sensor codes.
  2. Inspect the sensor connector and wiring for an open, short, or corrosion.
  3. Check the sensor air-gap and inspect the reluctor ring for damage.
  4. Test the sensor's output while the wheels or shaft turn.
  5. Replace the intermediate shaft speed sensor if it produces no signal.

FAQ

Quick answers

Is it safe to drive with P0793?+
Usually yes for short trips, but shifting may be harsh or erratic and it can enter limp mode. Have it diagnosed soon.
Can I just clear P0793?+
It returns as soon as the sensor signal is missing again. Repair the sensor or wiring to clear it for good.

Related codes

Read & clear P0793 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX