P07B1
Transmission Friction Element H Stuck On
Transmission
Generic OBD-II
High
What it means
P07B1 means one of the transmission's internal friction elements — a clutch pack or band — is staying applied when it should release. The engine still starts, but a stuck-on element can bind the transmission, cause harsh shifts, or stall the engine as you come to a stop. It's a serious code, usually from a sticking solenoid or valve body, dirty fluid, or a mechanically stuck element.
High
Can I keep driving? The car may drive but an internal clutch won't release — that can bind the transmission, cause harsh engagement, or even stall the engine at stops, so get it fixed before driving much.
Common symptoms
What you'll notice
- Check-engine light on
- Harsh or delayed shifting
- Transmission binding, slipping, or erratic shifting
- Engine stalling or hesitation when coming to a stop
- Transmission overheating
Common causes
Most likely first
- Sticking pressure control or shift solenoid keeping the element appliedLikely
- Valve body fault trapping apply pressureCommon
- Low or contaminated transmission fluidCommon
- Mechanically stuck or worn friction element (clutch pack or band)Less often
- Wiring/connector fault or failing transmission control module (TCM)Less often
How to diagnose & fix
Work through it in order
- Check transmission fluid level and condition — service it if low, burnt, or dirty.
- Read freeze-frame data and scan for related solenoid/pressure codes.
- Inspect and test the pressure control and shift solenoids; a stuck solenoid is a common cause.
- Inspect the valve body for a stuck valve trapping pressure, and check wiring/connectors.
- If the hydraulics test good, the friction element itself is likely stuck and needs internal repair.
FAQ
Quick answers
Is it safe to drive with P07B1?+
No, beyond reaching a shop. A friction element that won't release can bind the transmission and stall the engine at stops, and the extra heat damages the clutches quickly.
Can I just clear P07B1?+
It returns as soon as the element stays applied again. The stuck solenoid, valve body, or worn element behind it must be repaired.
Related codes
Read & clear P07B1 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX