P0810

Clutch Position Control Error

Q: Is it safe to drive with P0810?

Usually for short trips, but poor clutch engagement can worsen and stress the driveline, so have it diagnosed soon.

Q: Can I just clear P0810?

You can, but if the sensor, actuator, or clutch is at fault the error returns, often with the same shifting problems.

Transmission Generic OBD-II Medium

What it means

P0810 means the control module sees a mismatch between the commanded and actual clutch position, so the clutch may not engage or disengage as expected. On cars with an automated or dual-clutch transmission this shows up as hard shifts, slipping, or jerky take-up. Common causes are the clutch position sensor, its wiring, the clutch actuator, or a worn clutch.

Medium

Can I keep driving? Often drivable, but the clutch may not engage or disengage cleanly, causing hard shifts or slipping — repair soon, and be ready for reduced shift quality.

Real-world scan data

Seen in

241

scans in the past year

Found in

<0.1%

of scans

0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Difficulty shifting gears
Clutch slipping or failing to engage/disengage cleanly
Jerky or delayed take-up from a stop
Reduced power or poor acceleration
Check-engine light on

Common causes

Most likely first

Faulty clutch position sensor or out-of-range readingLikely
Damaged wiring or corroded connectors in the clutch position circuitCommon
Faulty clutch actuator (on automated/dual-clutch systems)Common
Worn clutch disc or pressure plateLess often
Low or contaminated clutch/transmission fluidLess often
Failed transmission control module (TCM)Less often

How to diagnose & fix

Work through it in order

Read freeze-frame data and compare the clutch position reading with the actual clutch state.
Inspect the clutch position sensor connector and wiring for damage or corrosion.
Test the sensor's output across its range and replace it if out of spec.
On automated/dual-clutch transmissions, check the clutch actuator and perform any required clutch adaptation/relearn.
Check fluid level and inspect the clutch for wear; repair or replace worn components. Clear and road-test.

FAQ

Quick answers

Is it safe to drive with P0810?+

Usually for short trips, but poor clutch engagement can worsen and stress the driveline, so have it diagnosed soon.

Can I just clear P0810?+

You can, but if the sensor, actuator, or clutch is at fault the error returns, often with the same shifting problems.

Read & clear P0810 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX