DOBD DashX Browse all codes Blog
P0877

Transmission Fluid Pressure Sensor/Switch D Circuit Low

Transmission / fluid pressure Generic OBD-II Medium

What it means

P0877 means the transmission controller reads a low-voltage signal from fluid pressure sensor/switch "D", usually from a short-to-ground or open in the wiring. The engine starts and runs, but without an accurate pressure reading the transmission can shift late, slip, or drop into limp mode until the sensor circuit is repaired.

Medium

Can I keep driving? The engine runs, but shifts may be delayed, erratic, or slip, and the transmission may limp — have it looked at before long trips.

Real-world scan data

Seen in
49
scans in the past year
Found in
<0.1%
of scans
<0.1%
of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty transmission fluid pressure sensor/switch (D)
  2. Short-to-ground or open in the sensor wiring
  3. Loose or corroded connector in the circuit
  4. Low or dirty transmission fluid affecting the reading

How to diagnose & fix

Work through it in order

  1. Check fluid level and condition; correct if low or burnt.
  2. Read freeze-frame and inspect the pressure sensor connector and wiring for a short-to-ground or open.
  3. Compare the sensor's reported pressure with a scan tool to actual line pressure.
  4. Repair wiring/connector faults, then replace the pressure sensor/switch if it still reads low. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0877?+
Short-term yes, but slipping or erratic shifts strain the transmission. Get the circuit and fluid checked soon.
Can I just clear P0877?+
It comes back until the sensor circuit is repaired. Clearing only resets the light temporarily.

Related codes

Read & clear P0877 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX