Electric/Auxiliary Transmission Fluid Pump Control Module Internal Temperature Sensor Circuit Range/Performance
What it means
The internal temperature sensor circuit inside the electric auxiliary transmission fluid pump control module is reading outside the expected range. The module uses it to protect itself from heat while it drives the fluid pump.
Can I keep driving? Usually drivable in the short term, but transmission fluid flow may suffer, so get it read soon.
What this part does
Many control modules include a sensor that measures their own internal temperature. The module uses the reading to protect its electronics from overheating and, in some cases, to correct the readings of other sensors. It is built into the module rather than being a separate part on the car. A fault may reduce module performance or trigger a warning light.
Common symptoms
What you'll notice
- Overheating of the transmission fluid
- Transmission slipping or shifting erratically
- Illumination of the "Check Engine" or "Transmission" warning light
- Loss of power or decreased acceleration
- Unusual noises or vibrations coming from the transmission
Read & clear P0C1D yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
Need a scanner that reads ABS, airbag and more? GaragePro OBD scan tools ship worldwide. Claim deal →
Common causes
Most likely first
- Faulty electric/auxiliary transmission fluid pump control module
- Insufficient cooling for the control module
- Short circuit or electrical malfunction in the control module
- Excessive heat generated by the vehicle's transmission system
- Inadequate airflow to the control module
Repair
Likely repair
- Parts often involved: electric transmission oil pump
- Labor: 0.5–4 h
- Difficulty: Hard
- DIY: Garage recommended
How to diagnose & fix
Work through it in order
- Check the fluid level and condition in the transmission and replace if necessary.
- Inspect and clean the transmission cooler and lines to ensure proper fluid flow and cooling.
- Check and repair any damaged or faulty wiring or connectors in the transmission fluid pump control module circuit.
- Replace the transmission fluid pump control module if it is determined to be defective.
Related codes
About this page
Scan figures come only from diagnostic scans recorded through our own apps and tools. Cars are usually scanned because a symptom or warning light prompted it, so these figures describe our scan records, not how often a fault occurs in any make or model.
Notes about specific manufacturers summarise public records (NHTSA owner complaints, recalls and manufacturer service bulletins), cited under each note. They report what those records say, not our measurements, and they do not suggest that any manufacturer or vehicle is better or worse than another.
Repair time and cost estimates come from a public repair dataset and are typical ranges, not quotes.
OBD DashX is not affiliated with, sponsored by or endorsed by any vehicle manufacturer. Manufacturer and model names and trademarks belong to their owners and are used only to identify vehicles.
This page is general information, not professional advice. Have safety-critical faults (brakes, steering, airbags, high-voltage systems) checked by a qualified technician. To the extent the law allows, we accept no liability for repairs or decisions made from this page.
Businesses: this content is available through our API. For business →