Generator Inverter Temperature Sensor B Circuit Low
What it means
The generator inverter temperature sensor B circuit is reading lower than the module expects. The sensor reports the generator inverter temperature so the module can reduce power before it overheats.
Can I keep driving? Usually yes for a short, gentle trip, but heat can damage the battery or drive parts; if power drops or a warning shows, stop and get it checked. Do not open high-voltage (orange) cables or covers yourself; leave that to a trained technician.
Seen in 52 scans on our apps in the past year.
What this part does
This sensor measures the temperature of the generator inverter, the power electronics unit that handles high-voltage electricity in a hybrid vehicle. The control system uses the reading to decide when cooling is needed and when to limit power so the electronics are not damaged by overheating. The components involved carry high voltage, so work on them is for trained people. A fault may bring a warning or reduced power.
Real-world scan data
Appears alongside · share of P0DF5 scans
Codes often seen with P0DF5. Of the 52 scans on our apps that reported P0DF5 in the past year, 71.2% also showed U27B9, 59.6% showed U27F5 and 51.9% showed P04F1 (EVAP System Purge Line Performance). If your scan shows any of these too, read their pages as well, because one fault can trigger another.
Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.
Common symptoms
What you'll notice
- Decreased performance
- Loss of power or poor acceleration
- Warning light illuminates
Common causes
Most likely first
- Faulty generator
- Malfunctioning inverter or converter
- Defective temperature sensor
- Wiring or connection issues in the circuit
How to diagnose & fix
Work through it in order
- Replace the generator inverter temperature sensor
- Check and repair any loose or damaged wiring in the sensor circuit
- Clean or replace the sensor connector if there is corrosion or poor connection
- Inspect and repair any issues with the circuit or sensor ground connection
Related codes
Read & clear P0DF5 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
Need a scanner that reads ABS, airbag and more? GaragePro OBD scan tools ship worldwide. See scanners →