Drive Motor Inverter Temperature Sensor G Circuit High
What it means
The temperature sensor on the drive motor inverter, the unit that converts battery power to run the drive motor, is reading higher than the allowed range, which usually points to an open or a short to voltage in the circuit. The control module uses this reading to protect the inverter from heat, so it cannot trust the temperature it sees.
Can I keep driving? Short trips may be fine, but overheating can follow, so watch for power cuts or temperature warnings and get it checked soon. If a high-voltage warning appears or power is cut, stop and have it checked, and never touch orange high-voltage cables.
What this part does
The drive motor inverter temperature sensor measures how hot the inverter's power electronics are while driving the electric motor. The control module uses it to run cooling and to reduce power before the electronics overheat. Work on high-voltage parts is for trained people only. When it fails, you may notice limited power, a warning light, or an overheating message.
Common symptoms
What you'll notice
- Poor performance
- Illuminated warning light
Read & clear P0E26 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
Need a scanner that reads ABS, airbag and more? GaragePro OBD scan tools ship worldwide. Claim deal →
Common causes
Most likely first
- Faulty drive motor inverter temperature sensor
- Wiring or connector issues related to the drive motor inverter temperature sensor
- Malfunctioning drive motor inverter unit
- Overheating of the drive motor inverter unit
Repair
Likely repair
- Parts often involved: inverter (power electronics), wiring or connector, hybrid/EV control unit
- Labor: 1–6 h
- Difficulty: Hard
- DIY: Garage only
How to diagnose & fix
Work through it in order
- Check for any loose or damaged wiring connections related to the motor inverter temperature sensor.
- Inspect the motor inverter temperature sensor for any signs of damage or malfunction and replace if necessary.
- Ensure that the motor inverter is receiving proper voltage and there are no issues with the power supply
- If all else fails, consider replacing the motor inverter itself if deemed necessary.
Related codes
About this page
Scan figures come only from diagnostic scans recorded through our own apps and tools. Cars are usually scanned because a symptom or warning light prompted it, so these figures describe our scan records, not how often a fault occurs in any make or model.
Notes about specific manufacturers summarise public records (NHTSA owner complaints, recalls and manufacturer service bulletins), cited under each note. They report what those records say, not our measurements, and they do not suggest that any manufacturer or vehicle is better or worse than another.
Repair time and cost estimates come from a public repair dataset and are typical ranges, not quotes.
OBD DashX is not affiliated with, sponsored by or endorsed by any vehicle manufacturer. Manufacturer and model names and trademarks belong to their owners and are used only to identify vehicles.
This page is general information, not professional advice. Have safety-critical faults (brakes, steering, airbags, high-voltage systems) checked by a qualified technician. To the extent the law allows, we accept no liability for repairs or decisions made from this page.
Businesses: this content is available through our API. For business →