DOBD DashX Browse all codes Blog
P2759

Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical

Transmission controls Generic OBD-II Medium

What it means

P2759 is an electrical fault in the torque converter clutch (TCC) pressure control solenoid circuit. This solenoid controls converter lockup, which links the engine to the transmission for efficiency at cruising speed. An electrical fault can prevent lockup or cause shudder, hurting fuel economy, and may set a failsafe. The engine still starts and runs.

Medium

Can I keep driving? Usually yes, but you may notice a shudder, lost lockup, or slightly higher rpm on the highway. Get it serviced to protect fuel economy and the converter.

Real-world scan data

Seen in
41
scans in the past year
Found in
<0.1%
of scans
<0.1%
of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Faulty torque converter clutch (TCC) pressure control solenoid
  2. Open, shorted, or corroded solenoid wiring or connector
  3. Poor electrical connection in the transmission harness
  4. Dirty transmission fluid affecting the solenoid
  5. Faulty TCM/PCM (least likely)

How to diagnose & fix

Work through it in order

  1. Scan for related codes (P2757, P2758, P2760, P2761) and read freeze-frame.
  2. Check transmission fluid level and condition.
  3. Inspect the transmission connector and solenoid wiring for damage or corrosion.
  4. Measure the solenoid's resistance against spec through the harness.
  5. Replace the TCC solenoid (typically in the valve body) if faulty; verify the module last.

FAQ

Quick answers

Is it safe to drive with P2759?+
Yes, usually — the car drives, but you may lose lockup and fuel economy and feel a shudder. Fix it soon to avoid extra converter and fluid heat.
Can I just clear P2759?+
It returns until the solenoid or circuit is repaired.

Related codes

Read & clear P2759 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX