U0132

Lost Communication With Suspension Control Module A

Q: Is it safe to drive with U0132?

Yes. The suspension falls back to a default setting, so the ride may be firmer or the height off, but handling is safe for normal driving. Fix it to restore full ride control.

Q: Can I just clear U0132?

It returns while the module is offline. The wiring, power, or module fault needs to be repaired.

Communication network (suspension) Generic OBD-II Low

What it means

U0132 means the network has lost communication with the suspension (ride-control) module, which manages adaptive damping or air suspension. With it offline the suspension falls back to a default setting, so the ride may feel harsher or, on air systems, the height may not adjust. The car remains safe to drive normally while the wiring, power, or module fault is repaired.

Low

Can I keep driving? Yes — the suspension defaults to a fixed setting. Ride quality or height may be off, but the car drives normally while you get it fixed.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Suspension or ride-control warning light on
Adaptive damping stuck in one mode; ride harsher or softer than normal
On air suspension, ride height not adjusting or sitting low
Suspension control module missing when scanned

Common causes

Most likely first

Open, shorted, or chafed CAN wiring to the suspension moduleLikely
Corroded or loose connector at the moduleCommon
Blown fuse or lost power/ground to the moduleCommon
Failed suspension control moduleLess often
Bus fault preventing the module from reportingLess often

How to diagnose & fix

Work through it in order

Scan all modules and confirm the suspension module is offline.
Check its power, ground, and fuse feeds.
Inspect the wiring and connector at the module for damage or corrosion.
Test the CAN bus lines to the module for open or short.
If wiring and power are good, replace the module, clear the code, and confirm the suspension responds.

FAQ

Quick answers

Is it safe to drive with U0132?+

Yes. The suspension falls back to a default setting, so the ride may be firmer or the height off, but handling is safe for normal driving. Fix it to restore full ride control.

Can I just clear U0132?+

It returns while the module is offline. The wiring, power, or module fault needs to be repaired.

Read & clear U0132 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX