DOBD DashX ☰ Alle Codes durchsuchen Blog
P0D57

Reichweiten-/Leistungsüberwachung des Näherungsdetektor-Kreises A

Generischer OBD-II

Was es bedeutet

The proximity detection circuit A is reading outside the range the module expects or not matching what it should. The proximity circuit tells the vehicle that a charging cable is plugged in, and the car uses it to allow or block charging and driving.

Can I keep driving? Usually yes, as this mostly affects charging; get it read if charging fails. Do not open high-voltage (orange) cables or covers yourself; leave that to a trained technician.

Häufige Symptome

Das werden Sie bemerken

Häufige Ursachen

Wahrscheinlichste zuerst

  1. Loose, corroded or damaged wiring or connector at the charge port proximity (cable-detect) line
  2. Dirt, moisture or damaged contacts in the charge port or on the charging cable plug
  3. Faulty proximity sensor or cable-detect resistor in the plug or port
  4. Charging cable or charging station fault giving the wrong signal
  5. Control module fault, or incorrect programming or calibration

Diagnose & Behebung

Arbeiten Sie es der Reihe nach ab

  1. Try a different charging cable or charging station and see whether the fault follows the cable
  2. Inspect the charge port and plug for dirt, moisture, bent or burnt pins and clean them gently when unplugged and the vehicle is off
  3. Check the wiring and connectors from the charge port to the control module for damage or corrosion
  4. Check the charge port proximity sensor circuit readings against the service data with a scan tool
  5. Only then suspect the control module and have it checked or reprogrammed by a technician

Verwandte Codes

P0D57 selbst auslesen & löschen

Auto scannen, Code bestätigen und nach der Reparatur löschen — mit OBD DashX auf Ihrem Handy.

▶ Bei Google Play

Sie brauchen einen Scanner für ABS, Airbag und mehr? GaragePro-OBD-Scanner werden weltweit versandt. Scanner ansehen →