P0219

Engine Overspeed Condition

Engine protection Generic OBD-II High

What it means

P0219 means the engine exceeded its maximum safe RPM. Most often it's logged after a one-time over-rev — such as a missed downshift in a manual — rather than a component failure. Check freeze-frame data for the recorded RPM, inspect the engine for damage, and rule out a sticking throttle before dismissing it.

High

Can I keep driving? It depends — the code logs that engine RPM exceeded its safe limit; if it was a one-time over-rev (e.g. a mis-shift), inspect for engine damage, but if the throttle is sticking, treat it as urgent.

Real-world scan data

Seen in

348

scans in the past year

Found in

0.1%

of scans

0.1%

of scans that found faults

Appears alongside · share of P0219 scans

P0087in 25.3% of scans

P0335in 24.1% of scans

P0217in 21.8% of scans

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
A logged over-rev (RPM above the safe limit) in freeze-frame data
Possible engine noise or damage if the over-rev was severe

Common causes

Most likely first

Over-revving from a missed or wrong-gear downshift (manual transmissions)Likely
Sticking or stuck-open throttleCommon
Faulty throttle or engine-speed sensor inputCommon
Mechanical or ECM fault causing an RPM spikeLess often

How to diagnose & fix

Work through it in order

Read freeze-frame data to see the recorded RPM and conditions of the over-rev.
If it was a one-time driving event, inspect the engine (valvetrain, timing) for damage.
Check the throttle for sticking or binding.
Verify crank/cam and speed-sensor signals are accurate.
Clear the code and monitor to see if it recurs.

FAQ

Quick answers

Is it safe to drive with P0219?+

If the code came from a single over-rev and the engine sounds and runs normally, it's likely okay — but inspect for damage. If the throttle sticks or RPM spikes on its own, don't drive until it's fixed.

Can I just clear P0219?+

You can clear it after a one-time over-rev. If it returns without hard driving, something is causing unwanted RPM spikes and needs investigating.

Read & clear P0219 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX