B Camshaft Position Actuator Position Sensor C Circuit High Bank 1

Common symptoms

What you'll notice

• Check the wiring and connectors of the B camshaft position actuator position sensor.
• Inspect the camshaft position actuator for any signs of damage or malfunction.
• Verify the voltage and signal output of the camshaft position actuator position sensor.
• Clean or replace the camshaft position actuator position sensor if it is contaminated or faulty.
• If all else fails, consider replacing the entire camshaft position actuator unit.

Common causes

Most likely first

1. Faulty camshaft position actuator position sensor
2. Loose or corroded wiring connections to the sensor
3. Faulty engine control module (ECM) or powertrain control module (PCM)
4. Short circuit or open circuit in the sensor circuit
5. Faulty camshaft position actuator

How to diagnose & fix

Work through it in order

1. Engine misfires or runs rough
2. Loss of power or poor acceleration
3. Stalling or difficulty starting the engine
4. Increased fuel consumption
5. Illuminated check engine light