P0765

Shift Solenoid D

Q: Is it safe to drive with P0765?

You can usually drive it to a shop, but with the solenoid faulty the transmission may not shift correctly or may enter limp mode, so keep trips short.

Q: Can I just clear P0765?

It will clear, but returns within a few drive cycles unless the solenoid, wiring, or fluid problem is repaired.

Transmission / shift control Generic OBD-II Medium

What it means

P0765 means the transmission control module has detected a problem in the shift solenoid "D" circuit. Because that solenoid helps route hydraulic pressure for gear changes, you may notice delayed, harsh, or missing shifts, and the transmission can drop into limp mode to protect itself.

Medium

Can I keep driving? Usually drivable but shifts may be harsh, delayed, or missing and the transmission may enter limp mode — fine to reach a shop, don't put off the repair.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Delayed, harsh, or missing gear changes
Transmission slipping or flaring between shifts
Limp mode (stuck in one gear)
Check-engine light on

Common causes

Most likely first

Failed shift solenoid DLikely
Damaged wiring or a poor connector in the solenoid D circuitCommon
Low transmission fluid level or dirty fluidCommon
Sticking or worn valve bodyLess often
Failed transmission control module (TCM)Less often

How to diagnose & fix

Work through it in order

Scan for codes and read freeze-frame data to confirm the fault.
Check transmission fluid level and condition — top up or service if low, dirty, or burnt.
Inspect the shift solenoid D wiring and connector for damage or corrosion.
Test the solenoid's resistance and operation against specification.
If the solenoid and circuit are good, inspect the valve body; replace the TCM only as a last resort. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0765?+

You can usually drive it to a shop, but with the solenoid faulty the transmission may not shift correctly or may enter limp mode, so keep trips short.

Can I just clear P0765?+

It will clear, but returns within a few drive cycles unless the solenoid, wiring, or fluid problem is repaired.

Read & clear P0765 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX