Shift Solenoid C
What it means
P0760 flags an electrical fault in the shift solenoid C circuit. This solenoid directs hydraulic pressure to engage a gear, so a fault can cause the transmission to skip a shift, stick in one gear, or shift harshly. The usual causes are a failed solenoid, wiring or connector problems, or low/contaminated transmission fluid.
Can I keep driving? The car will usually still drive but may shift roughly or stick in a gear — okay for short trips, but repair it before it stresses the transmission.
Real-world scan data
Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.
Common symptoms
What you'll notice
- Check-engine light on
- Failure to shift into the expected gear
- Transmission stuck in one gear or limp mode
- Delayed or harsh shifting
- Reduced fuel economy
Common causes
Most likely first
- Failed shift solenoid CLikely
- Wiring or connector fault in the solenoid circuitCommon
- Loose or corroded electrical connectionsCommon
- Low or contaminated transmission fluidLess often
- Failed transmission control module (TCM)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and check transmission fluid level and condition first.
- Inspect the solenoid connector and wiring for corrosion, chafing, or loose pins.
- Test shift solenoid C resistance and operation; replace if faulty.
- Clean or repair any loose or corroded connections in the circuit.
- If the solenoid and wiring are good, evaluate the TCM. Clear and road-test.
FAQ
Quick answers
Is it safe to drive with P0760?+
Can I just clear P0760?+
Related codes
Read & clear P0760 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.