Shift Solenoid C Performance/Stuck Off
What it means
P0761 means shift solenoid C is under-performing or stuck off — not applying when the transmission commands it. That produces harsh, delayed, or missed shifts and can leave the transmission in limp mode. The engine still starts and runs; the problem is in the shift control circuit or the solenoid itself.
Can I keep driving? The car still drives, but expect harsh or missed shifts and possible limp mode — drive gently and have it checked before long trips.
Real-world scan data
Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.
Common symptoms
What you'll notice
- Check-engine light on
- Harsh or delayed shifting
- Transmission slips or fails to shift into certain gears
- Reduced fuel economy
Common causes
Most likely first
- Shift solenoid C failed or stuck offLikely
- Low or contaminated transmission fluidCommon
- Wiring or connector fault in the solenoid circuitCommon
- Valve body wear or stickingLess often
- Failed transmission control module (TCM) — least commonLess often
How to diagnose & fix
Work through it in order
- Confirm the code and read freeze-frame data.
- Check fluid level and condition; top up or flush if it is dirty.
- Inspect the solenoid C wiring and connector for damage or corrosion.
- Test the solenoid and replace it if out of spec.
- If unresolved, inspect the valve body and TCM. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0761?+
Can I just clear P0761?+
Related codes
Read & clear P0761 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.