P0768

Shift Solenoid D Electrical

Q: Is it safe to drive with P0768?

For short trips usually, but the transmission may shift harshly or drop into limp mode. Repair it soon so you don't add wear driving in a fixed gear.

Q: Can I just clear P0768?

It returns quickly — an electrical fault in the solenoid circuit is detected on every drive cycle until repaired.

Transmission / shift controls Generic OBD-II Medium

What it means

P0768 means the transmission control module detected an electrical fault — a short or open — in the shift solenoid D circuit. Because that solenoid helps route hydraulic pressure for gear changes, shifting can turn harsh or the transmission may lock into limp mode. The problem is usually the solenoid itself or its wiring rather than internal transmission damage.

Medium

Can I keep driving? Usually drivable, but shifts may be harsh or the transmission may lock into limp mode — get it fixed to avoid added wear.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Harsh or delayed shifting
Transmission stuck in one gear (limp mode)
Slipping feel during shifts
Check-engine light on

Common causes

Most likely first

Shorted or open shift solenoid D windingLikely
Damaged wiring or connector in the solenoid D circuitCommon
Loose or corroded electrical connectionsCommon
Low or dirty transmission fluidLess often
Failed transmission control module (TCM)Less often

How to diagnose & fix

Work through it in order

Read freeze-frame data and check for other transmission codes.
Inspect the shift solenoid D connector and wiring for shorts, opens, or corrosion.
Measure solenoid D resistance and compare to the specification.
Check transmission fluid level and condition.
Replace the solenoid if out of spec; evaluate the TCM last. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0768?+

For short trips usually, but the transmission may shift harshly or drop into limp mode. Repair it soon so you don't add wear driving in a fixed gear.

Can I just clear P0768?+

It returns quickly — an electrical fault in the solenoid circuit is detected on every drive cycle until repaired.

Read & clear P0768 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX