P0962

Pressure Control Solenoid A Control Circuit Low

Q: Is it safe to drive with P0962?

Short trips are usually fine, but the transmission may shift harshly or enter limp mode. Prolonged driving with wrong line pressure can wear the transmission, so repair it promptly.

Q: Can I just clear P0962?

It will return once the circuit fault is present again. The low-voltage condition needs to be traced and repaired.

Transmission controls Generic OBD-II Medium

What it means

P0962 means the transmission control module detected an abnormally low voltage in the control circuit for pressure control solenoid 'A', the solenoid that regulates transmission line pressure. It usually points to a wiring short or open, or a failed solenoid, and often shows up as harsh shifts or a limp-mode condition rather than a no-start.

Medium

Can I keep driving? Usually driveable, but the transmission may drop into limp mode with harsh or limited shifting — fix it soon to avoid added wear.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Harsh, delayed, or erratic gear shifts
Transmission stuck in a limited-gear limp mode
Reduced fuel economy

Common causes

Most likely first

Short-to-ground or open in the pressure control solenoid 'A' wiringLikely
Failed pressure control (line-pressure) solenoid 'A'Common
Loose or corroded connector at the solenoid or transmission harnessCommon
Faulty transmission control module (TCM) — less commonLess often

How to diagnose & fix

Work through it in order

Read freeze-frame data and inspect the solenoid 'A' connector and wiring for shorts, opens, or corrosion.
Measure the solenoid circuit for the correct resistance and check for a short to ground.
Test the pressure control solenoid's resistance against spec and replace it if out of range.
If wiring and solenoid are good, have the TCM diagnosed. Clear and re-test.

FAQ

Quick answers

Is it safe to drive with P0962?+

Short trips are usually fine, but the transmission may shift harshly or enter limp mode. Prolonged driving with wrong line pressure can wear the transmission, so repair it promptly.

Can I just clear P0962?+

It will return once the circuit fault is present again. The low-voltage condition needs to be traced and repaired.

Read & clear P0962 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX