DC/DC Converter Status Circuit
What it means
The module reports a problem in the status circuit of the DC/DC converter, the unit that steps high-voltage battery power down to run the low-voltage system. The module is not receiving the status signal it expects.
Can I keep driving? Usually yes in the short term, but get it read soon. A failing converter can let the low-voltage battery run down, so avoid long trips.
What this part does
The DC/DC converter in a hybrid or electric vehicle steps the high-voltage battery's power down to the 12-volt level. It keeps the regular 12-volt battery charged and supplies lights, computers, and other low-voltage equipment. Work on high-voltage parts is for trained people only. When it fails, the 12-volt battery may run down and warning lights may appear.
Common symptoms
What you'll notice
- Check-engine or hybrid system warning light on
- Low-voltage battery draining or low voltage warnings
- Dim lights or weak electrical accessories
- Hybrid or electric system limited or not ready
Read & clear P0A08 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
Need a scanner that reads ABS, airbag and more? GaragePro OBD scan tools ship worldwide. Claim deal →
Common causes
Most likely first
- Wiring or connector fault at the converter status line
- Low-voltage battery or ground weakness
- Blown fuse in the converter supply or enable circuit
- Faulty DC/DC converter
- Controlling module fault
Repair
Likely repair
- Parts often involved: DC-DC converter, wiring or connector, hybrid/EV control unit
- Labor: 1–4 h
- Difficulty: Hard
- DIY: Garage recommended
How to diagnose & fix
Work through it in order
- Read all codes with a scanner that supports hybrid or electric systems and note which other codes are stored.
- Check the low-voltage battery and its terminals; low supply voltage can set several codes at once.
- Check fuses and relays for the converter and its enable line.
- Inspect the converter connector and wiring for corrosion or damage. Leave orange high-voltage cables and connectors alone; high-voltage work belongs to a trained technician.
- Measure low-voltage system voltage with the vehicle ready; it should hold steady, not sag. Suspect the converter or module last.
Related codes
About this page
Scan figures come only from diagnostic scans recorded through our own apps and tools. Cars are usually scanned because a symptom or warning light prompted it, so these figures describe our scan records, not how often a fault occurs in any make or model.
Notes about specific manufacturers summarise public records (NHTSA owner complaints, recalls and manufacturer service bulletins), cited under each note. They report what those records say, not our measurements, and they do not suggest that any manufacturer or vehicle is better or worse than another.
Repair time and cost estimates come from a public repair dataset and are typical ranges, not quotes.
OBD DashX is not affiliated with, sponsored by or endorsed by any vehicle manufacturer. Manufacturer and model names and trademarks belong to their owners and are used only to identify vehicles.
This page is general information, not professional advice. Have safety-critical faults (brakes, steering, airbags, high-voltage systems) checked by a qualified technician. To the extent the law allows, we accept no liability for repairs or decisions made from this page.
Businesses: this content is available through our API. For business →