High Voltage System Interlock Circuit A Low
What it means
The high voltage interlock loop, circuit A, reads low. The loop is a low-voltage safety circuit that confirms covers and connectors on the high voltage system are in place, and the system will not close its contactors if it is open or shorted.
Can I keep driving? Usually okay for a short, gentle trip, but a hybrid/EV warning can mean reduced power or a protective shutdown; get it read soon and stop if the car loses drive power or the warning turns red.
What this part does
The high-voltage interlock loop is a low-voltage safety circuit running through the connectors and covers of a hybrid or electric vehicle's high-voltage system. If a connector is opened or a cover removed, the loop breaks, and the control system shuts off high voltage for safety. Because it protects people from high-voltage hazards, work on the system is for trained people. A fault may stop the car from starting or moving.
Common symptoms
What you'll notice
- Engine misfires or runs rough
- Difficulty starting the vehicle
- Decreased fuel efficiency
- Loss of power or sluggish acceleration
- Illumination of the check engine light
Read & clear P0A0C yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
Need a scanner that reads ABS, airbag and more? GaragePro OBD scan tools ship worldwide. Claim deal →
Common causes
Most likely first
- Faulty interlock relay or fuse
- Short circuit in the interlock wiring
- Malfunctioning high voltage controller
- Defective interlock switch
- Faulty high voltage battery pack
Repair
Likely repair
- Parts often involved: high-voltage cable or interlock
- Labor: 0.5–4 h
- Difficulty: Hard
- DIY: Garage recommended
How to diagnose & fix
Work through it in order
- Check and replace any faulty fuses or relays related to the high voltage system interlock circuit
- Inspect and repair any damaged or loose connections in the high voltage system interlock circuit
- Test and replace the high voltage system interlock circuit sensor or switch if it is found to be malfunctioning
- Ensure that the high voltage system interlock circuit wiring and components are properly grounded
Related codes
About this page
Scan figures come only from diagnostic scans recorded through our own apps and tools. Cars are usually scanned because a symptom or warning light prompted it, so these figures describe our scan records, not how often a fault occurs in any make or model.
Notes about specific manufacturers summarise public records (NHTSA owner complaints, recalls and manufacturer service bulletins), cited under each note. They report what those records say, not our measurements, and they do not suggest that any manufacturer or vehicle is better or worse than another.
Repair time and cost estimates come from a public repair dataset and are typical ranges, not quotes.
OBD DashX is not affiliated with, sponsored by or endorsed by any vehicle manufacturer. Manufacturer and model names and trademarks belong to their owners and are used only to identify vehicles.
This page is general information, not professional advice. Have safety-critical faults (brakes, steering, airbags, high-voltage systems) checked by a qualified technician. To the extent the law allows, we accept no liability for repairs or decisions made from this page.
Businesses: this content is available through our API. For business →