P2583

Cruise Control Front Distance Range Sensor Single Sensor or Center

Q: Is it safe to drive with P2583?

Yes. Only the adaptive cruise/distance feature is affected; the engine and normal brakes are unaffected. Just don't rely on adaptive cruise until it's fixed.

Q: Can I just clear P2583?

It will return if the sensor is blocked, misaligned, or faulty. Many vehicles also require a calibration procedure before the feature works again.

Adaptive cruise control Generic OBD-II Low

What it means

P2583 means the front distance (radar) sensor used by adaptive cruise control isn't reporting a valid range — commonly because it's blocked, dirty, misaligned, or faulty. It disables the follow-distance feature but doesn't affect engine performance or normal braking. Many vehicles need a calibration procedure after the sensor is cleaned or replaced.

Low

Can I keep driving? Fine to drive — the engine and normal brakes work as usual. Adaptive cruise control will likely be disabled until the front distance sensor is repaired.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Adaptive cruise control disabled or unavailable
Warning light or message about the front sensor/driver-assist system
Check-engine or driver-assistance fault light on
No change to engine performance or standard braking

Common causes

Most likely first

Blocked, dirty, iced, or misaligned front radar/distance sensorLikely
Faulty front distance range sensorCommon
Wiring or connector fault at the sensorCommon
Sensor calibration/aiming lost after a repair or impactLess often

How to diagnose & fix

Work through it in order

Read freeze-frame data and confirm the fault is the front distance sensor.
Clean the sensor face and clear any obstruction (badge, ice, mud, aftermarket cover).
Inspect the sensor mounting and alignment for impact damage or shift.
Check the sensor connector and wiring for damage or corrosion.
Perform the manufacturer's sensor calibration/aiming, or replace the sensor if faulty, then re-test.

FAQ

Quick answers

Is it safe to drive with P2583?+

Yes. Only the adaptive cruise/distance feature is affected; the engine and normal brakes are unaffected. Just don't rely on adaptive cruise until it's fixed.

Can I just clear P2583?+

It will return if the sensor is blocked, misaligned, or faulty. Many vehicles also require a calibration procedure before the feature works again.

Read & clear P2583 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX