P2853

Clutch A Pressure Discharge Performance

Q: Is it safe to drive with P2853?

Short trips may be fine, but a clutch that will not release properly can slip and overheat. Keep driving to a minimum until it is diagnosed.

Q: Can I just clear P2853?

It will return if the clutch, solenoid, or fluid problem remains. Fix the underlying pressure-discharge fault first.

Transmission Generic OBD-II Medium

What it means

P2853 means the transmission cannot bleed off (discharge) hydraulic pressure on clutch A the way it should when releasing that clutch. If the pressure lingers, the clutch releases slowly or slips, giving harsh shifts, shudder, or a limp mode. Common causes are a sticking valve or solenoid, low or dirty fluid, or a worn clutch pack.

Medium

Can I keep driving? Usually yes but with caution — the affected clutch may release slowly or slip, causing harsh shifts or limp mode; prolonged slipping can damage the transmission, so get it checked soon.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Harsh or delayed shifts, or a shift shudder
Clutch slipping or slow to release
Transmission drops into limp mode

Common causes

Most likely first

Clutch A pressure not bleeding off as commanded (valve body/solenoid fault)Likely
Low or dirty transmission fluidCommon
Worn clutch pack or stuck apply pistonCommon
Debris or varnish restricting the discharge passageLess often
Faulty transmission control module (less common)Less often

How to diagnose & fix

Work through it in order

Read freeze-frame data and check transmission fluid level and condition first.
Command the clutch A apply/release with a scan tool and watch the pressure response.
Inspect the valve body and clutch A control solenoid for sticking or debris.
Service or replace the valve body / clutch components as diagnosis indicates.
Clear the code and road-test to confirm the clutch applies and releases cleanly.

FAQ

Quick answers

Is it safe to drive with P2853?+

Short trips may be fine, but a clutch that will not release properly can slip and overheat. Keep driving to a minimum until it is diagnosed.

Can I just clear P2853?+

It will return if the clutch, solenoid, or fluid problem remains. Fix the underlying pressure-discharge fault first.

Read & clear P2853 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX