P0710

Transmission Fluid Temperature Sensor A Circuit

Q: Is it safe to drive with P0710?

Short-term usually yes, but without a valid fluid temperature the transmission may shift harshly and cannot protect itself from overheating. Repair it soon.

Q: Can I just clear P0710?

You can, but the code returns if the sensor or wiring is faulty; fix the circuit and check the fluid rather than clearing it.

Transmission Generic OBD-II High

What it means

P0710 means the computer sees a problem with the transmission fluid temperature sensor circuit. The transmission uses fluid temperature to schedule shifts and torque-converter lockup, so a bad signal typically causes harsh or delayed shifts and can let the fluid overheat. It does not by itself stop the engine from starting.

High

Can I keep driving? Usually yes — the car still drives, but shifts may feel harsh or delayed; repair it to protect the transmission from heat damage.

Real-world scan data

Seen in

113

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Harsh, delayed, or erratic shifting
Torque converter not locking up (higher rpm at cruise)
Slightly reduced fuel economy

Common causes

Most likely first

Faulty transmission fluid temperature sensorLikely
Wiring or connector fault in the sensor circuitCommon
Low or degraded transmission fluidCommon
Internal fault in the valve-body sensor assemblyLess often
Faulty TCM/PCM (least likely)Less often

How to diagnose & fix

Work through it in order

Scan and read the fluid-temperature value; look for implausible readings (very high or very low).
Check the transmission fluid level and condition; top up or service if needed.
Inspect the sensor wiring and connector for damage and corrosion.
Replace the fluid temperature sensor (often part of the internal wiring/valve body) if out of range.
If the circuit tests good, evaluate the TCM/PCM.

FAQ

Quick answers

Is it safe to drive with P0710?+

Short-term usually yes, but without a valid fluid temperature the transmission may shift harshly and cannot protect itself from overheating. Repair it soon.

Can I just clear P0710?+

You can, but the code returns if the sensor or wiring is faulty; fix the circuit and check the fluid rather than clearing it.

Read & clear P0710 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX