P0913
Gate Select Actuator Circuit High
Automated shift actuator
Generic OBD-II
Medium
What it means
P0913 means the gate select actuator circuit is reading a high voltage. On automated-manual transmissions this actuator moves the shift mechanism across gear "gates," so a high-circuit fault — usually a wiring short-to-power, an open, or a failing actuator — can cause difficulty selecting gears or leave the transmission stuck. The engine starts and runs, but shifting is affected until the circuit is repaired.
Medium
Can I keep driving? The engine runs, but the automated shifter may not select gears properly — expect shifting trouble or limp mode, and repair before relying on the car.
Common symptoms
What you'll notice
- Check-engine light on
- Difficulty shifting or failure to engage certain gears
- Transmission stuck in a gear position
- Reduced drivability or limp mode
Common causes
Most likely first
- Faulty gate select actuatorLikely
- Wiring shorted to voltage or open in the actuator circuitCommon
- Poor or corroded electrical connection at the actuatorCommon
- Charging-system overvoltage in the vehicle electrical systemLess often
- Faulty transmission control module (rare)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and inspect the gate select actuator wiring and connector for shorts to power or opens.
- Check charging-system voltage to rule out a system-wide overvoltage.
- Measure the actuator circuit voltage and resistance against specification.
- Test and, if faulty, replace the gate select actuator.
- If the circuit and actuator check out, diagnose the TCM. Clear and re-test.
FAQ
Quick answers
Is it safe to drive with P0913?+
Cautiously. The gate select actuator picks the shift gate on automated-manual transmissions, so a fault can leave you unable to reach certain gears or stuck in one — best to repair before longer trips.
Can I just clear P0913?+
It clears, but a high-circuit or actuator fault returns until the wiring or actuator is fixed.
Related codes
Read & clear P0913 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.
✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX