P2190

System Too Rich at Idle Bank 2

Q: Is it safe to drive with P2190?

For short trips yes, but a sustained rich mixture can foul the plugs and damage the catalytic converter, so don't delay the repair.

Q: Can I just clear P2190?

You can, but until the over-fueling cause is fixed the bank 2 fuel trims will drift rich again and reset the code.

Fuel & air metering Generic OBD-II Medium

What it means

P2190 means that at idle, bank 2 (the cylinder bank away from cylinder 1) is running with too much fuel for the air entering the engine — the ECM has trimmed fuel to its limit and the mixture is still rich. Common causes are high fuel pressure, leaking injectors, or a MAF/O2 sensor misreporting. Left unaddressed, the extra fuel can foul plugs and damage the catalytic converter.

Medium

Can I keep driving? Drivable short-term, but a persistently rich mixture wastes fuel, fouls plugs, and can overheat the catalytic converter over time; repair it before that happens.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Rough or unstable idle
Poor fuel economy and a strong fuel smell
Sooty exhaust or fouled spark plugs

Common causes

Most likely first

Incorrect fuel pressure (regulator or pump delivering too much)Likely
Leaking or dripping fuel injectors on bank 2Common
Faulty mass air flow (MAF) sensor under-reading airflowCommon
Faulty upstream oxygen sensor on bank 2 skewing fuel trimLess often
Incorrect PCV connection or engine-mechanical issue affecting the mixtureLess often

How to diagnose & fix

Work through it in order

Read freeze-frame and live fuel-trim data to confirm the rich condition at idle on bank 2.
Check fuel pressure against spec; a high reading points to the regulator or return system.
Inspect and clean the MAF sensor, then compare its airflow reading to expected values.
Test the bank 2 upstream O2 sensor's response; a lazy or biased sensor can drive over-fueling.
Look for leaking injectors and confirm PCV routing before clearing and re-testing.

FAQ

Quick answers

Is it safe to drive with P2190?+

For short trips yes, but a sustained rich mixture can foul the plugs and damage the catalytic converter, so don't delay the repair.

Can I just clear P2190?+

You can, but until the over-fueling cause is fixed the bank 2 fuel trims will drift rich again and reset the code.

Read & clear P2190 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX