U0416

Invalid Data Received From Vehicle Dynamics Control Module

Communication network (stability control) Generic OBD-II Medium

What it means

U0416 sets when a control module reads data from the vehicle dynamics (stability control) module that is missing or implausible. The usual effect is that electronic stability and traction control shut off as a precaution — the car still drives and brakes normally, but those safety aids are disabled until it's fixed.

Medium

Can I keep driving? The car still drives and brakes normally, but electronic stability and traction control may be turned off — drive with extra caution in poor conditions.

Real-world scan data

Seen in

889

scans in the past year

Found in

0.1%

of scans

0.2%

of scans that found faults

Appears alongside · share of U0416 scans

U0401in 18.8% of scans

U0100in 12.3% of scans

U0122in 11.6% of scans

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Stability/traction (ESC) and often ABS warning lights on, with the check-engine light
Electronic stability and traction control disabled
"Service stability control" or similar warning message
Normal braking and steering still available
Related communication codes stored in other modules

Common causes

Most likely first

Faulty vehicle dynamics (stability) control module or its power/ground supplyLikely
Corroded, loose, or damaged connectors and data-bus (CAN) wiringCommon
Low or unstable battery and charging-system voltageCommon
Software incompatibility after a module was replaced or updatedLess often
An underlying yaw, steering-angle, or wheel-speed sensor fault reported by the moduleLess often

How to diagnose & fix

Work through it in order

Scan all modules and record stored codes and freeze-frame data before clearing.
Check battery and charging voltage — low or noisy voltage is a common cause of bus faults.
Inspect connectors and wiring to the vehicle dynamics control module and along the data bus.
If a module was recently replaced or flashed, confirm the software is compatible.
Run the manufacturer's pinpoint tests on the module and its yaw/steering-angle inputs; replace only if confirmed.

FAQ

Quick answers

Is it safe to drive with U0416?+

The car still steers and brakes normally, so you can drive carefully, but stability and traction control may be off — take extra care in rain, snow, or hard cornering until it's fixed.

Can I just clear U0416?+

You can, but if the module or its data link is still faulty the code returns and the stability-control warning lights come back on.

Read & clear U0416 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX