P0D58
Circuito de Detecção de Proximidade A - Baixo
Generic OBD-II
O que significa
The proximity detection circuit A is reading lower than the module expects. The proximity circuit tells the vehicle that a charging cable is plugged in, and the car uses it to allow or block charging and driving.
Can I keep driving? Usually yes, as this mostly affects charging; get it read if charging fails. Do not open high-voltage (orange) cables or covers yourself; leave that to a trained technician.
Sintomas comuns
O que vai notar
- Charging does not start or stops after starting
- Charge port light or dash message shows a charging cable fault
- Vehicle may not detect the cable as plugged in
- Luz de aviso acesa
Causas comuns
Mais prováveis primeiro
- Loose, corroded or damaged wiring or connector at the charge port proximity (cable-detect) line
- Dirt, moisture or damaged contacts in the charge port or on the charging cable plug
- Faulty proximity sensor or cable-detect resistor in the plug or port
- Charging cable or charging station fault giving the wrong signal
- Control module fault, or incorrect programming or calibration
Como diagnosticar e reparar
Siga os passos por ordem
- Try a different charging cable or charging station and see whether the fault follows the cable
- Inspect the charge port and plug for dirt, moisture, bent or burnt pins and clean them gently when unplugged and the vehicle is off
- Check the wiring and connectors from the charge port to the control module for damage or corrosion
- Check the charge port proximity sensor circuit readings against the service data with a scan tool
- Only then suspect the control module and have it checked or reprogrammed by a technician
Códigos relacionados
Leia e apague o P0D58 você mesmo
Efetue a leitura ao seu veículo, confirme o código e apague-o depois de reparado — com o OBD DashX no seu telemóvel.
Precisa de um scanner que leia ABS, airbag e mais? Os scanners OBD GaragePro são enviados para todo o mundo. Ver scanners →