P2213

NOx Sensor Circuit Bank 2

Q: Is it safe to drive with P2213?

Mechanically yes, but this is an emissions sensor — expect the light to stay on, possible emissions-test failure, and on some diesels a gradual power derate if it's ignored.

Q: Can I just clear P2213?

It returns while the sensor or wiring is faulty, and the emissions system stays flagged until it's repaired.

Emissions / NOx sensor Generic OBD-II Medium

What it means

P2213 is a general circuit fault for the NOx sensor on bank 2 — the ECM can't get a valid reading from it. This sensor feeds the emissions (and SCR, on diesels) system. Drivability is usually normal, but the emissions monitor is affected, and the cause is typically the sensor, its wiring, or connector.

Medium

Can I keep driving? The engine runs normally, but the emissions/SCR system relies on this sensor; leaving it can trigger warning lights, failed emissions, and eventually a power derate on some diesels.

Real-world scan data

Seen in

scans in the past year

Found in

<0.1%

of scans

<0.1%

of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Check-engine light on
Possible emissions / SCR warning messages
Higher tailpipe NOx (may fail an emissions test)
On some diesels, eventual power derate if ignored

Common causes

Most likely first

Faulty NOx sensor (bank 2)Likely
Open or shorted NOx sensor wiringCommon
Poor or corroded connector at the sensorCommon
Contaminated sensor tip or an exhaust leak near the sensorLess often

How to diagnose & fix

Work through it in order

Scan the NOx sensor live data and compare against a known-good range.
Inspect the sensor connector and wiring for damage, shorts, or corrosion.
Check for exhaust leaks near the sensor that could skew readings.
Replace the NOx sensor if it won't report a valid signal with good wiring.
Clear and complete a drive cycle to confirm.

FAQ

Quick answers

Is it safe to drive with P2213?+

Mechanically yes, but this is an emissions sensor — expect the light to stay on, possible emissions-test failure, and on some diesels a gradual power derate if it's ignored.

Can I just clear P2213?+

It returns while the sensor or wiring is faulty, and the emissions system stays flagged until it's repaired.

Read & clear P2213 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play

✓ Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX