Intake Manifold Runner Control Stuck Closed Bank 1
What it means
P2006 means the intake manifold runner flaps on bank 1 are stuck closed. These flaps change intake airflow to optimize power across the rev range, so when they stick you typically get reduced power or sluggish response in part of the range rather than a no-start. The engine still runs and starts normally.
Can I keep driving? Drivable, but expect reduced power or sluggish response in part of the rev range; not urgent, though it should be fixed.
Real-world scan data
Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.
Common symptoms
What you'll notice
- Check-engine light on
- Reduced power or sluggish acceleration
- Rough idle or hesitation
- Slight drop in fuel economy
Common causes
Most likely first
- Intake manifold runner flaps or linkage seized in the closed positionLikely
- Faulty intake manifold runner control (IMRC) actuator or solenoidCommon
- Carbon buildup jamming the runner flapsCommon
- Damaged or disconnected vacuum hose to the actuatorLess often
- Wiring or connector fault, or a faulty PCM (rare)Less often
How to diagnose & fix
Work through it in order
- Read freeze-frame data and inspect the IMRC wiring, connector, and vacuum lines.
- Actuate the runner control (by hand or scan tool) to confirm the flaps move freely.
- Clean carbon from the runner flaps and linkage if they are sticking.
- Replace the IMRC actuator or solenoid if it does not move the flaps.
- Clear the code and re-test; the PCM is only a last resort after wiring is verified.
FAQ
Quick answers
Is it safe to drive with P2006?+
Can I just clear P2006?+
Related codes
Read & clear P2006 yourself
Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.