DOBD DashX Browse all codes Blog
P2445

AIR System Pump Stuck Off Bank 1

Secondary air injection (emissions) Generic OBD-II Low

What it means

P2445 means the Bank 1 secondary air injection pump was commanded on but the system saw no airflow — the pump appears stuck off. Because this pump only runs briefly at cold start to reduce emissions, the car drives normally, but the fault must be fixed for the emissions monitor to pass.

Low

Can I keep driving? Safe to drive — the secondary air pump only runs at cold start for emissions, so day-to-day driving is unaffected, but the fault should be fixed to pass emissions.

Real-world scan data

Seen in
39
scans in the past year
Found in
<0.1%
of scans
<0.1%
of scans that found faults

Figures reflect only diagnostic scans recorded through our own apps and tools. Cars are typically scanned because a symptom or warning light prompted it, so these counts describe our scan records — not the incidence of faults in any model, and not the quality, reliability, or safety of any vehicle. No comparison between manufacturers or models is implied. All trademarks belong to their respective owners; no affiliation or endorsement is implied.

Common symptoms

What you'll notice

Common causes

Most likely first

  1. Failed secondary air injection pump on Bank 1
  2. Blown pump fuse or faulty air-pump relay
  3. Open or corroded wiring/connector to the pump
  4. Seized pump from water or carbon ingestion
  5. Stuck or clogged air switching/check valve

How to diagnose & fix

Work through it in order

  1. Read freeze-frame data and confirm the pump is commanded on but not moving air.
  2. Check the air-pump fuse and relay.
  3. Verify power and ground reach the pump when commanded.
  4. Inspect the check valve and plumbing for carbon or water damage.
  5. Replace the air pump if it fails to run with good power and ground, then clear and re-test.

FAQ

Quick answers

Is it safe to drive with P2445?+
Yes. The pump only assists cold-start emissions, so the car runs normally, but fix it to pass an emissions test.
Can I just clear P2445?+
It will return the next time the secondary-air monitor runs unless the pump or its circuit is repaired.

Related codes

Read & clear P2445 yourself

Scan your car, confirm the code, and clear it once it's fixed — with OBD DashX on your phone.

▶ Get it on Google Play
Verified name — SAE J2012 / ISO 15031-6Guidance reviewed by OBD DashX